Water & Wastewater Solutions.
Treat process, cooling and wastewater streams, and recover reusable water to cut freshwater use and wastewater volumes.
Treat · Wastewater & reuse · Assessment
How we treat water
-
Media, cartridge and membrane filtration that removes suspended solids and protects downstream equipment.
-
Pressure-driven membrane separation that removes most dissolved solids, run with proper pretreatment and antiscalant.
-
Scale, corrosion and microbiological control with blowdown management, tested against pH, conductivity, hardness and alkalinity.
-
Softening, pH control and polishing stages for processes that need stable or very low-conductivity water.
How we treat and recover wastewater
-
Coagulation, flocculation, oxidation, neutralization, oil/water separation and clarifiers matched to the contaminants present.
-
Dewatering, filtration and handling of the solids that treatment generates.
-
Staged membrane and chemical programs that return more usable water to the site instead of discharging it.
-
Bringing reclaimed or non-potable sources into the supply where site conditions allow.
What we run for you
-
Sampling and treatability testing so treatment is designed around what is actually in the water.
-
Review of how water enters, moves through and leaves a site, with small-scale testing before a full system is built.
-
Mobile treatment units and crews for commissioning, shutdowns or unexpected capacity loss.
Products · Programs · Supply & support
Specialty Chemicals.
Application-specific chemistry for solar, semiconductors, produced water, food & beverage and data centers that improves treatment, protects equipment and keeps plants performing.
What we supply
-
Gather fine solids and oil droplets into particles that settle or filter out.
-
Specialty polymers and cleaning chemistry that prevent scale on membranes and heat-transfer surfaces and hold recovery.
-
Amine, quaternary-amine and phosphate-ester programs that protect metal in cooling, process and disposal systems.
-
Oxidizing and non-oxidizing products, including peracetic acid and chlorine dioxide, for cooling, process and wastewater systems.
-
Oxygen and H₂S scavengers, oil/water demulsifiers, defoamers and filter aids.
-
Caustic, acids, solvents, glycol and cleaning chemicals for treatment and industrial processes.
How the chemistry is applied
-
Chemical programs built for the water, equipment and goal, not a standard dosing table.
-
Pumps, controllers and sensors that keep feed proportional to flow, with coupons and indicators that show how well the program is working.
-
Programs aligned to industry guidance such as ASHRAE 188 for cooling systems, tuned over time to cut cost and improve performance.
What we run for you
-
Specialists who select chemistry and dosage for the site’s actual water, then start up and troubleshoot.
-
Totes, drums and bulk delivery sized to usage, delivered by our own fleet including HazMat loads.
-
Testing, SDS and certificates of analysis for every batch.
Chemicals by industry
The same chemistry portfolio, matched to what each industry's water and processes demand. Every product is quality-tested and documented before it ships.
Quality-tested · Documented
-
Solar
Chemistry for cell and module manufacturing, and for keeping installed arrays productive.
- Texturing and etching chemicals (alkalis, acids, hydrogen peroxide) for wafer and cell lines
- Cleaning solvents such as IPA, plus pH adjusters and rinse-water chemistry
- Panel and glass cleaning formulations for utility-scale sites
- Process-water chemicals for high-purity rinse systems
-
Semiconductors
High-purity chemicals and consumables for fab processes, supplied with batch-to-batch consistency.
- Acids, bases and solvents for cleaning, etching and stripping
- Hydrogen peroxide, ammonium hydroxide and process additives
- Neutralization chemistry for acidic and alkaline rinse streams
- Batch documentation and certificates of analysis
-
Produced water
Treatment chemistry for oil and gas operators handling produced and flowback water.
- Scale and corrosion inhibitors
- Biocides and H₂S scavengers
- Demulsifiers, coagulants and flocculants
- Oxygen scavengers and pH control, ahead of hauling to treatment and disposal
-
Food & beverage
Cleaning, sanitizing and water chemistry for plants where hygiene and uptime come first.
- Clean-in-place (CIP) cleaners and acid rinses
- Sanitizers including peracetic acid and chlorine-based products
- Food-grade acids and pH adjusters
- Boiler, cooling-tower and wastewater treatment chemistry
-
Data centers
Chemistry that keeps cooling loops clean, protected and efficient.
- Corrosion and scale inhibitors for closed and open loops
- Biocides and microbial control
- Glycol and heat-transfer fluids
- Cleaning and flush chemicals for commissioning
-
Another industry?
We supply specialty and industrial chemicals well beyond these five. Tell us what your process needs.
Contact us
Engineering, Equipment & Technical Services.
Support projects from water analysis and treatment design through equipment integration, commissioning, chemical optimization, ongoing operations and maintenance.
Equipment · Engineering · Plant operations
What we manufacture & supply
-
Reverse osmosis membranes, filter elements, housings and cartridge filters that we manufacture.
-
Modular piping, dosing and treatment skids built and pressure-tested in a factory, then shipped as a complete unit.
-
Pre-engineered pumps and the control and measurement hardware that makes a system operable.
-
Corrosion-resistant thermoplastic piping, plus molded tanks and fittings built to site drawings.
-
Storage and process tanks, wet-well lift stations, secondary containment and HDPE lagoon and pond liners.
-
Stocked parts so a failed seal, pump or membrane does not mean extended downtime.
What we design and build
-
Treatment trains and systems designed around the water analysis, recovery target and discharge route.
-
P&ID-level engineering, including large-diameter piping.
-
Shop-built skids pressure- and leak-tested before shipping.
-
Tie-ins to existing systems without shutting down what already works.
-
Processes for durable, chemical-resistant plastic tanks and components, including custom runs built to a project’s drawings.
What we run for you
-
Tuning of chemistry, cycles and operating setpoints to cut cost and improve performance.
-
Sensors, sampling and regular reports that catch drift in water quality and performance early.
-
Field crews who install and start up the equipment they helped specify.
-
Scheduled service, preventive maintenance and operator support, including long-term O&M.
-
A crew that can reach a site quickly outside scheduled maintenance.
-
Drawings, manuals and maintenance records at project close.
Water supply · Hauling · Treatment · Disposal
Fresh Water Sourcing, Hauling & Disposal.
Fresh water in, water and solid waste out, with treatment at our facility and disposal to a permitted disposal well, all on our own last-mile fleet. One contract, one dispatch line, one set of records.
- 01Water supply
- 02Hauling
- 03Treatment
- 04Disposal
Fresh water in
-
Potable and non-potable water delivered by tanker for construction, commissioning, cooling-tower makeup or backup, scheduled or on call.
-
Dust control, hydrostatic testing and commissioning fill, with a delivery record for every load.
-
Tanks and bladders placed on site so water can be held, then used or hauled when you are ready.
Water, waste and product moved
-
One fleet for supply and removal: vacuum, tank and trailer units for pump-outs of tanks, basins, sumps and vessels.
-
Flatbed, dry-van and container moves of solid waste to final disposal, with shipping documentation.
-
HazMat and non-HazMat shipments, ISO-tank moves, 20-foot tilt-chassis service and power-only moves, with SDS control.
-
Trailers, tanks and project equipment mobilized to site and back.
-
Dispatch coordination and shipment visibility, trained drivers, equipment inspection, grounding and overfill protection, and a documented chain of custody.
-
Rapid response for upsets, leaks, flushes and outages.
Treat first only if needed, then dispose
-
Sampling and profiling against disposal requirements before the first load, re-checked as conditions change.
-
Water that is not ready for disposal is treated first: solids and oil removal, scale, corrosion and bacteria control, pH adjustment and filtration to injection specification.
-
Water that cannot be reused is injected at a permitted disposal well, with acceptance checks before unloading.
-
Manifests, disposal records and monthly volume reporting for every load.
Cleaning & Maintenance.
Cooling water workover: we clean, repair and reset your cooling system, then set it up to run efficiently, so heat transfer, reliability and water use get back on track.
Clean · Maintain · Reset & optimize
Towers & heat exchange
-
Basins cleaned out, sludge and scale removed, worn fill and drift eliminators replaced, and fans, gearboxes and motors inspected.
-
Tubes brushed or chemically descaled to restore heat transfer, with seals, gaskets and chiller components inspected.
Pumps, feed & controls
-
Pump seals and impellers serviced, dead legs flushed, and corroded valves and strainers repaired or replaced.
-
Feed pumps and dosing equipment maintained, and controllers calibrated so treatment stays on target.
Back to running well
-
System drained, flushed and re-dosed with biocides, scale inhibitors and corrosion control chemicals before startup.
-
Cycles tuned to run efficiently, and empty chemical drums removed and disposed of.
-
Any other work your system needs, scoped after an assessment of your equipment.
